该词条未找到_海词词典

您要查找的是不是：

Keywords sintering method;marbled glass-ceramic; 烧结法;微晶玻璃大理石;
The sintering method, and metal powder slurry foaming can make metal foams even in the solid state. 采用金属粉末烧结法、浆料发泡法等制备工艺可以从固相制备金属泡沫材料。
The sintering method,and metal powder slurry foaming can make metal foams even in the solid state. 电沉积法以及气相沉积法可用于制备高孔隙率的金属泡沫材料。
Micro-nanostructured WC composite coatings were successfully fabricated by induced heating sintering method on the surface of Q235 steel. 用感应加热熔敷方法在Q235钢表面制备了微纳米碳化钨复合涂层,并分析了涂层的微观结构、显微硬度及耐磨性。
Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced. 介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程;
On the basis of theoretically research and experimental quest, two times sintering method at the presence of carbon as reductant has been got. 采用该方法制备长余辉发光材料尚未见到报道。
The chemical compositions of a bauxite tailing were analyzed.A glass-ceramics was prepared using the bauxite tailing as main raw material by sintering method. 摘要分析了铝土矿尾矿的化学组成，并以铝土矿尾矿为主要原料利用烧结法制备出了微晶玻璃。
Abstract： Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating m ad e by a vacuum fusion sintering method are discussed in this paper. 摘要：研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
Keywords sintering;unloading;PLC;autocontrol; 烧结;卸料;PLC;自动控制;
Keywords Sintering;Burnt lime;Slaker; 烧结;生石灰;消化器;
TiO_2 catalyst supported on granular activated carbon was made using sol-gel method and sintering method, at the same time the porous and fine- dispersed Mo-TiO_2/AC could be abtained using polyethylene glycol (PEG) as modification. 采用溶胶-凝胶法和浸渍法将Mo(3%25)-TiO_2负载到粒状活性炭上，并用聚乙二醇(PEG)为修饰剂成功制备了多孔、表面分散均匀的负载Mo(3%25)-TiO_2催化剂。
Keywords Sintering Sinter RDI Chloridate Spraying; 烧结;烧结矿;RDI;氯化物;喷洒;
Micro-nanostructured WC composite coatings were successfully fabricated by induced heating sintering method on the surface of Q235 steel. The microstructure, micr-hardness and wear resistance of the composite coatings were studied. 用感应加热熔敷方法在Q235钢表面制备了微纳米碳化钨复合涂层,并分析了涂层的微观结构、显微硬度及耐磨性。
Keywords Sintering Meral luster glazd tile; 烧结;金属光泽;墙砖;
An innovating technology is put forward in this paper and the new type salt /ceramic composite energy storage material (CESM) is fabricated successfully by mixing and sintering method. 本文提出了将无机盐和陶瓷材料进行复合的创新方法,采用混合-烧结法成功地制备出了新型无机盐/陶瓷基复合储能材料,克服现有无机盐相变材料和显热材料存在的缺点。
Keywords sintering;spinel;light burning; 烧结;镁铝尖晶石;轻烧;
In this paper,the powder sintering method for making porous aluminum foam is introduced,the technological parameters of process and the porous structure of products are investigated. 文章采用粉末烧结法制备了铝多孔泡沫金属材料,并对材料制备过程的工艺参数及材料的孔结构进行了初步的研究。
Keywords sintering Fuzzy control;BTP control; 烧结模糊控制;BTP控制;
Keywords sintering equipment;WCS;lifetime; 烧结设备;WC-钢梯度耐磨材料;使用寿命;